My<cod/>.net
Настройка связки Asterisk и cisco spa8800?
Просмотров: 468
Ответов: 3
Всем здравствуйте!
есть сервер с asterisk'ом (freepbx-2.7.0), есть fxo gateway Cisco SPA8800 (4FXS и 4FXO) и телефоны Cisco 7940G и 7960G
Не получается настроить исходящий вызов с asterisk'a через Cisco SPA8800 на PSTN
входящий вызов проходит
настройка SIP транка:
type=friend<br/>
host=192.168.1.14&dynamic<br/>
port=5060<br/>
dtmfmode=rfc2833<br/>
context=default<br/>
insecure=very<br/>
Настройка линии на Cisco SPA8800
в логах астериска при исходящем звонке:
[Feb 21 10:56:30] VERBOSE[4524] netsock.c: == Using SIP RTP TOS bits 184<br/>
[Feb 21 10:56:30] VERBOSE[4524] netsock.c: == Using SIP RTP CoS mark 5<br/>
[Feb 21 10:56:30] VERBOSE[4524] app_dial.c: -- Called 421962/280223<br/>
[Feb 21 10:56:30] VERBOSE[4524] app_dial.c: -- SIP/421962-0000003e is circuit-busy<br/>
[Feb 21 10:56:30] VERBOSE[4524] app_dial.c: == Everyone is busy/congested at this time (1:0/1/0)<br/>
[Feb 21 10:56:30] VERBOSE[4524] pbx.c: -- Executing [s@macro-dialout-trunk:20] NoOp("SIP/105-0000003d", "Dial failed for some reason with DIALSTATUS = CONGESTION and HANGUPCAUSE = 1") in new stack<br/>
Знающие люди, подскажите, пожалуйста, что не так
type=friend<br/>
host=192.168.1.14&dynamic<br/>
port=5060<br/>
dtmfmode=rfc2833<br/>
context=default<br/>
insecure=very<br/>[Feb 21 10:56:30] VERBOSE[4524] netsock.c: == Using SIP RTP TOS bits 184<br/>
[Feb 21 10:56:30] VERBOSE[4524] netsock.c: == Using SIP RTP CoS mark 5<br/>
[Feb 21 10:56:30] VERBOSE[4524] app_dial.c: -- Called 421962/280223<br/>
[Feb 21 10:56:30] VERBOSE[4524] app_dial.c: -- SIP/421962-0000003e is circuit-busy<br/>
[Feb 21 10:56:30] VERBOSE[4524] app_dial.c: == Everyone is busy/congested at this time (1:0/1/0)<br/>
[Feb 21 10:56:30] VERBOSE[4524] pbx.c: -- Executing [s@macro-dialout-trunk:20] NoOp("SIP/105-0000003d", "Dial failed for some reason with DIALSTATUS = CONGESTION and HANGUPCAUSE = 1") in new stack<br/>